Buying used dump trucks for sale from China works when you match one specific truck’s configuration, documented condition and shipping plan to your destination and job. This checklist is for contractors, quarry operators, dealers and fleet buyers in Africa, the Middle East, West Asia and Southeast Asia who are considering used HOWO and SHACMAN tippers. It covers selection, brand comparison, inspection, cost and export — in the order you need to decide them.
Yingju Machinery sources used used dump trucks from the Chinese domestic market. Truck stock turns over quickly, so units are often matched to a buyer’s request rather than listed online for long; send your requirements and we come back with specific trucks.
Match the truck to the work and the destination
A dump truck is chosen by the material it carries, the roads it drives on and the rules of the country it will be registered in. Body volume and payload are different things: a large body full of light topsoil can be within limits, while the same body full of wet sand or crushed rock can be far over the truck’s rating or local axle limits.
| Application | Typical material | What to prioritise |
|---|---|---|
| Construction engineering | Excavated soil, demolition waste | Body volume, turning circle on site, tipping clearance |
| Mining and quarrying | Rock, ore, aggregate | Reinforced body floor, chassis frame condition, axle rating |
| Road construction and maintenance | Base course, gravel, asphalt | Road-legal axle loads, fuel use on long hauls |
| Logistics and material handling | Sand, coal, bulk materials | Payload within registration limits, tarpaulin or cover |
| Agriculture and land development | Soil, fill, crop residues | Off-road traction, ground clearance |
Most used Chinese tippers are 6×4 (three axles, two driven) or 8×4 (four axles, two steered). 8×4 trucks spread weight over more axles; 6×4 trucks are shorter and easier to manoeuvre. Before choosing, confirm four destination points with your customs broker or transport authority: left- or right-hand drive, the maximum axle and gross weights allowed on public roads, the emission standard required for registration and any age limit on imported used vehicles. Many Chinese trucks are left-hand drive, which matters for right-hand-traffic markets such as parts of East and Southern Africa.
HOWO vs SHACMAN: compare trucks, not badges
Whether a used HOWO or a used SHACMAN dump truck is the better buy depends on the individual truck’s condition, configuration and local parts support — not the brand alone. HOWO is built by Sinotruk and SHACMAN by Shaanxi Automobile; both are widely exported, and both build many versions with different engines, gearboxes and bodies. Two trucks with the same badge can be very different machines.
| Compare | Used HOWO unit | Used SHACMAN unit |
|---|---|---|
| Model, year, registration date | From the registration document | From the registration document |
| Engine make, power and emission level | Engine plate photo | Engine plate photo |
| Gearbox and axle layout | Spec plate, 6×4 or 8×4 | Spec plate, 6×4 or 8×4 |
| Body dimensions and floor/side thickness | Measured, not from a brochure | Measured, not from a brochure |
| Odometer and repair history | Photo plus written disclosure | Photo plus written disclosure |
| Parts and workshops at destination | Check with local dealers | Check with local dealers |
Spare-parts access at your destination is often the deciding factor. Before buying, ask a local workshop or parts dealer which engine and gearbox families they already support. Brochure figures also vary: seller listings for the popular HOWO 371 6×4 tipper, for example, quote body volumes from roughly 18 to 22 m³ and payloads around 20–25 tonnes depending on the version. Treat such figures as a starting point and confirm the actual body and rating for each truck.
What to inspect on a used dump truck
A used dump truck inspection should cover identity, the drivetrain, the chassis and the tipping system, because a failure in any of them stops the truck working. Ask for evidence on each line below for the specific truck you are buying.
- Identity and records: photos of the VIN/chassis number, engine number and registration document, matching the quote.
- Cold start: a video starting the engine from cold, showing exhaust smoke, idle stability and dashboard warnings.
- Engine and cooling: oil and coolant leaks, radiator condition, blow-by at the oil filler.
- Gearbox and driveline: a short drive video with gear changes, propshaft and differential leaks, unusual noise.
- Chassis and suspension: frame rails checked for cracks, welding repairs or bending; springs, hangers and bushings.
- Brakes and tyres: air system build-up time, tread depth and matching tyres on each axle.
- Tipping system: a full raise-and-lower video of the body, hydraulic cylinder leaks, hinge pins, PTO operation.
- Body: floor and side wear, patched holes, tailgate operation.
- History: written disclosure of any known accident or major repair.
An odometer photo shows the current reading, not the truck’s full history; compare it with wear on pedals, the seat, tyres and the body floor. Yingju Machinery provides photos, cold-start videos and tipping-cycle videos for a unit on request, and buyers are welcome to appoint a third-party inspector — see our inspection services. Safety note: tipping tests should be carried out by qualified staff on level ground, and nobody should work under a raised body that is not mechanically propped.
Price on request: compare the full landed cost
Used dump truck prices depend on the individual truck — year, engine, configuration, condition, repairs already done — and on quantity and delivery terms, so we quote each unit rather than publishing a price band. Multi-unit fleet orders are negotiable. To compare offers fairly, put them on the same worksheet:
| Cost line | Notes |
|---|---|
| Truck price | Currency, validity date, what is included (spare wheel, tools, tarpaulin) |
| Agreed repairs and new parts | Written list, done before shipment |
| Inspection | Inspector, scope and who pays |
| Inland transport and export handling in China | Included or not, depending on Incoterm |
| Ocean freight and insurance | Method (RoRo, flat rack, breakbulk), ports |
| Destination port charges, duties and taxes | Confirm with your customs broker |
| Registration, testing and delivery | Local requirements for imported trucks |
Every quote should state its currency, validity, Incoterm (EXW, FOB or CIF) and named port. A CIF quote covers freight and insurance to the destination port only; duties, port charges and registration are still yours to budget.
Export and shipping: confirm the plan before paying
How a used dump truck ships depends on its measured dimensions, actual weight, whether it runs and which carriers serve your port. A complete three- or four-axle tipper is too large for a standard container, so the usual options are:
| Method | When it fits | Points to confirm |
|---|---|---|
| RoRo | Running trucks on routes with RoRo service | Route availability, the truck must drive on and off |
| Flat rack | Ports without RoRo, or non-running trucks | Lashing drawings, crane handling at both ports |
| Breakbulk / bulk vessel | Multi-unit fleets to one port | Vessel schedule, stowage and port handling |
| Container | Only partly dismantled trucks or parts | Agreed dismantling and reassembly plan |
For each shipment we prepare a load plan, lashing drawings and weight documentation, and book through vetted freight agents. Shipping documents typically include the commercial invoice, packing list and bill of lading, plus any certificates your country requires — your customs broker confirms the final list. Our export process page shows each step from quote to arrival. Trucks can also share a shipment with other equipment, such as used excavators for sale for loading them on the same site.
Why buyers use Yingju Machinery for remote purchases
Buying a truck you cannot see in person depends on evidence and a single accountable contact. Yingju Machinery works from Hefei, Anhui, with its yard near the office so units can be shown on a live video call, and its own repair shop for agreed pre-shipment work. Large orders are assigned one account manager from quote to delivery, known repair history is disclosed in writing, and logistics costs are quoted up front. Our export cases page shows how we support buyers by region.
Frequently asked questions
How much is a dump truck?
A used dump truck’s price depends on the brand, year, engine, axle configuration, condition and repairs, so the only reliable figure is a quote for a specific truck. Compare offers on the same Incoterm and include freight, duties and registration, which can change the final cost significantly between countries.
How many tons can a dump truck hold?
A dump truck can legally carry what its manufacturer rating and your local axle and gross-weight limits allow, whichever is lower. Seller listings for common Chinese 6×4 tippers often quote 20–25 tonnes, but road limits in many countries are lower. Check the rating plate and your national transport rules before planning loads.
How many cubic yards are in a dump truck?
A dump truck’s volume is set by its body size, so measure the body or read the body specification. One cubic metre equals about 1.31 cubic yards; a 20 m³ body holds about 26 cubic yards when filled level. Volume is not the same as payload — dense materials reach the weight limit before the body is full.
How much does a dump truck weigh?
A dump truck’s empty (curb) weight depends on the chassis, engine and body. A seller listing for one HOWO 371 6×4 version gives about 12.5 tonnes empty, for instance, but bodies and versions differ. For shipping, use the weight on the truck’s documents or a weighbridge ticket, which also goes on the weight certificate.
Request a truck shortlist and export quote
Send us your destination country and port, the job and material, how many trucks you need, preferred brand and configuration, left- or right-hand drive, budget and timeline. We reply with matching trucks, their photos and videos, and an itemized quotation. Request a quote or message us on WhatsApp or WeChat from the contact page.
Written by
Yingju Machinery Export Team
The export team at Hefei Yingju Mechanical Equipment Co., Ltd. has sourced, inspected and shipped used construction machinery from Hefei, China.