Skip to content

Free planning tool

Shipping Method Calculator for Excavators & Heavy Equipment

Check whether a used excavator, loader or roller from China fits a 20 ft or 40 ft high-cube container, or will need a flat rack, RoRo or bulk shipment. Enter the transport dimensions and weight — no contact details needed. Results are planning guidance, not a freight quotation.

Enter your machine

Transport dimensions (m)

Use transport dimensions, not operating dimensions — measure with the boom folded and any removed parts taken off.

Your recommendation will appear here

Enter length, width, height and weight, then calculate. The tool compares your machine against typical ISO container door openings, interior length and net load.

Container fit

Excavator container size reference

An excavator's container suitability depends on its transport dimensions, weight and loading configuration — not its model name. The door opening is usually the tightest limit: a machine that fits the interior can still be blocked at the door. High-cube containers add height, not width.

Typical values for ISO 668 general-purpose containers; individual containers vary slightly by manufacturer, and the carrier's equipment specification prevails.

ContainerInterior L × W × HDoor W × HApprox. net load
20 ft standard (20GP)5.87 × 2.33 × 2.35 m2.29 × 2.26 m28,280 kg
40 ft standard (40GP)12.00 × 2.33 × 2.35 m2.29 × 2.26 m26,680 kg
40 ft high-cube (40HQ)12.00 × 2.33 × 2.65 m2.29 × 2.56 m26,545 kg
Flat rackOpen sides and top for over-width or over-height cargo; acceptance, overhang and weight distribution confirmed by the carrier.

How the calculator decides

  1. 1

    Door clearance

    Width and height are compared with the door aperture, with a small handling margin.

  2. 2

    Length

    Length is compared with interior length of a 20 ft, then 40 ft container.

  3. 3

    Weight

    Transport weight is compared with the approximate net load of each container.

  4. 4

    Fallback

    Out-of-gauge machines are pointed to flat rack, or RoRo if the machine can move under its own power.

Removing the bucket or arm creates a new set of packed dimensions that needs its own dismantling and reassembly plan. For the full comparison of container, flat rack, RoRo and bulk shipping, see shipping methods and export support, or look at machinery export cases by region.

Shipping questions

Will an excavator fit in a shipping container?

Mini and many compact excavators fit in a container, sometimes with the bucket or arm removed. The deciding factors are the transport width and height against the door opening — about 2.29 m wide and 2.26 m (standard) or 2.57 m (high-cube) high — plus the length and weight. Larger excavators usually travel on a flat rack, RoRo or as bulk cargo.

How much does an excavator weigh for shipping?

Shipping weight is the machine's weight in its transport configuration, including any attachments travelling with it. It can differ from the brochure operating weight, so we confirm it from the machine plate and documents and issue a weight certificate for the shipment.

How much does it cost to ship an excavator?

Cost depends on the transport dimensions, weight, method, route, destination port and season, plus inland haulage and handling at both ends. This calculator recommends a method only; ask us for a route-specific freight quote with the charges itemized.

Request a verified freight quote

Your calculator inputs are added to the message. Add the destination port and we will confirm the method and itemized logistics costs.

We reply within 24 hours. Your details are used only to answer your inquiry — see our privacy policy.

Request a Quote

Need the machine as well as the freight?

Browse inspected units or tell us what you need — we quote the machine, preparation and shipping together.

Request a Quote

Tell us what you need

Share the machine, quantity and destination port. You will receive an itemized quotation with photos and inspection videos on request.

We reply within 24 hours. Your details are used only to answer your inquiry — see our privacy policy.

Built with PolyDraft