Skip to content

Shipping & Import Updated 3 min read

Flat Rack vs RoRo vs Container: How to Ship an Excavator from China

Container, flat rack, RoRo and break-bulk each suit different machines. Learn how transport dimensions, weight and route decide the shipping method for your excavator or loader.

By Yingju Machinery Export Team

Flat Rack vs RoRo vs Container: How to Ship an Excavator from China

The best way to ship an excavator from China depends on the machine's transport dimensions, weight, handling requirements and the services available on your route — not on the machine type alone. This guide explains the four common methods and what information you need for an accurate quote.

Container shipping: for small machines

Enclosed containers are often the most economical option for mini excavators and other small machines. The machine must fit through the container door and inside the internal dimensions with room for lashing, and its weight must be within the container's payload. A 40-foot high-cube container adds height, not width, so it does not solve a machine that is too wide.

Several mini excavators can sometimes share one container, which lowers the freight cost per machine. Removing the bucket or folding the arm can help a borderline machine fit, but this must be planned and checked against actual measurements.

Flat rack: for oversized tracked machines

A flat rack is a container frame with no side walls or roof, so cargo can be wider or taller than a standard box. It suits crawler excavators, bulldozers and other machines that cannot drive onto a ship or are too big for a container. Flat rack cargo requires a proper lashing plan and weight distribution approved by the carrier, and out-of-gauge cargo can attract surcharges.

RoRo: for machines that can be driven or towed

Roll-on/roll-off (RoRo) vessels carry cargo driven or towed up a ramp into the ship. RoRo is a natural fit for wheel loaders, dump trucks, truck cranes, graders and road rollers, and many carriers also accept tracked machines using specialist handling. The machine sits below deck, protected from weather, and no container is needed. Availability depends on whether RoRo services call at your destination port.

Bulk and break-bulk: for very large or heavy cargo

Break-bulk shipping loads cargo individually into a general cargo vessel's hold, usually by crane. It is used for very large or heavy machines, or for project shipments where container and RoRo options are not suitable. Each shipment is assessed individually.

What decides the method

  • Transport dimensions — length, width and height in shipping configuration, not operating dimensions
  • Transport weight — including attachments shipped with the machine
  • Mobility — can the machine be driven or towed?
  • Route — which services call at your destination port
  • Quantity — multiple units may change the most economical option

Use the shipping method calculator to compare your machine's dimensions against typical container and flat rack limits, then confirm with a logistics quote.

Documents and preparation

Whatever the method, ask your supplier for a load plan, lashing drawings and a weight certificate, plus the export customs documents. Machines should be cleaned before shipping, as many importing countries inspect for soil and plant material. Yingju Machinery handles export documentation and coordinates with vetted freight agents; logistics costs are quoted upfront.

How much does it cost to ship an excavator?

There is no fixed price: cost depends on the method, the machine's size and weight, the route and the season. Container shipments of small machines are usually the lowest cost per unit, while out-of-gauge flat rack cargo costs more. The only reliable figure is a dated quote for your specific machine and port — request one here.

Information to send for a freight quote

A freight quote is only as accurate as the data behind it. Send the machine model, its transport length, width and height in metres, its shipping weight, whether the bucket or arm can be removed, the destination port and the number of units. For multi-unit orders, mention whether the machines can share containers or need separate flat racks. With that information the shipping method can be confirmed and costs itemized before you commit. To check a machine against standard container limits first, use our shipping method calculator; it gives a planning recommendation, not a confirmed booking.

excavator shippingflat rackRoRocontainerimport from China

Written by

Yingju Machinery Export Team

The export team at Hefei Yingju Mechanical Equipment Co., Ltd. has sourced, inspected and shipped used construction machinery from Hefei, China.

From the yard

Used excavators you can request files for

All used excavators →

Related guides

Request a Quote

Turn the checklist into a quotation.

Tell us the machine, quantity and destination port. We send photos, videos, the inspection report and an itemized quote — replies within 24 hours.

Request a Quote

Tell us what you need

Share the machine, quantity and destination port. You will receive an itemized quotation with photos and inspection videos on request.

We reply within 24 hours. Your details are used only to answer your inquiry — see our privacy policy.

Built with PolyDraft