Skip to content
Komatsu PC70-8 excavator cab-side front three-quarter view with bucket and blade

Photo of this listing in the yard. Ask for additional photos of the plate, hour meter, engine bay and undercarriage.

Used Excavators · Komatsu

Used Komatsu PC70-8 Excavator

This used Komatsu PC70-8 is offered from Hefei, China. Year, hours and price are confirmed on request with photos and test videos.

  • Model PC70-8
  • Year on request
  • Hours on request
  • Hefei, China

Price on request

Ask for the current price — you will get an itemized quote separating machine, preparation and freight.

Reply within 24 hours. Viewing at our Hefei yard or by live video on request.

About this PC70-8

This used Komatsu PC70-8 is a tracked excavator offered by Yingju Machinery. The machine plate identifies serial number 03181 and PIN KMTPC238L38C03181. Its photographed equipment includes an enclosed cab, steel tracks, a front dozer blade and a digging bucket. The year, working hours and installed bucket capacity remain unverified and are not estimated from the pictures.

The PC70-8 can be considered for drainage, utility trenches and general excavation where its actual attachment arrangement meets the job requirements. Compare the supplied cab, undercarriage and service-compartment photographs with the proposed work, and obtain the relevant operating records before purchase. Transport planning should use measured shipping dimensions and the destination port, not catalogue dimensions for a different configuration.

Specifications

Unit data is confirmed from the machine plate and documents; fields marked “on request” are verified before quotation.

BrandKomatsu
ModelPC70-8
Equipment typeUsed Excavators
ConditionUsed
Stock IDAssigned on inquiry
YearConfirmed on request
Hour-meter readingConfirmed on request
LocationHefei, China
Operating weightConfirmed per unit
Engine powerConfirmed per unit
Product identification numberKMTPC238L38C03181
Machine serial number03181

Inspection evidence

What you can review for this unit

  • Unit photographs — availablePhotographed in the yard, including the machine plate and hour meter on request.
  • Cold-start video — on requestRecorded on request before you commit — ask your account manager.
  • Hydraulic-cycle test — on requestFilmed on request: boom, arm, bucket, swing and travel.
  • Third-party inspection report — on requestArranged on request; you may also appoint your own inspector.

History disclosure

Accident and major-repair history has not been verified for this machine. No claim of accident-free condition or original paint is made.

Shipping this machine

Container, flat rack, RoRo or bulk shipment is chosen from the PC70-8's transport dimensions, weight and your destination port. We prepare the load plan, lashing drawing and weight certificate.

Buyer questions

How much does a Komatsu PC70-8 weigh?

Komatsu lists an approximate operating weight of 6,590 kg for the PC70-8 with 450 mm steel shoes and a 0.30 m³ bucket. This includes the operator, full fuel tank, specified fluids and standard equipment. The figure is a brochure configuration, not a verified weight for this used unit; confirm its fitted equipment and machine records.

What engine and power does the Komatsu PC70-8 have?

Komatsu specifies the SAA4D95LE-5 engine at 48.5 kW net power at 1,950 rpm for the PC70-8. The brochure also lists 50.7 kW gross, which is a different rating basis rather than extra available power. These are published model specifications; the fitted engine and its identification should be checked on the individual machine.

How deep can a Komatsu PC70-8 dig?

Komatsu's PC70-8 working-range table lists a maximum digging depth of 4,100 mm and maximum digging reach of 6,360 mm. These are published limits for the brochure's digging arrangement, not measured performance of this used machine. Confirm that its arm and bucket match the applicable specification before planning work around those dimensions.

What bucket sizes are listed for the Komatsu PC70-8?

Komatsu lists a 0.30 m³ general-digging bucket and 0.37 m³ options for the PC70-8. The larger light-duty and heavy-duty buckets have different widths and application requirements; the heavy-duty arrangement requires strengthened components. These published options do not identify the bucket fitted to this unit, so its capacity and compatibility still need verification.

Is this machine currently available?

Yes. This machine is listed as in stock at Hefei, China. The price is confirmed in a written quotation. Send your destination port and quantity and we reply within 24 hours.

What information can I request before purchase?

Contact us to request current machine-specific photos, available identification details, and inspection or test-video arrangements before purchase.

Inquire about this excavator

The machine is already filled in. Add your destination port and quantity for a complete quotation.

We reply within 24 hours. Your details are used only to answer your inquiry — see our privacy policy.

Similar excavators

All used excavators →

Request a Quote

Tell us what you need

Share the machine, quantity and destination port. You will receive an itemized quotation with photos and inspection videos on request.

We reply within 24 hours. Your details are used only to answer your inquiry — see our privacy policy.

Built with PolyDraft